Nuna Stokke PIPA Manual Del Usuario página 29

• Use recline adjustment, if needed, to
achieve correct angle for installation
• Recline adjustment snaps into position
• For instructions on using the stability leg
when installing the base, see stability leg
section. (Page 31)
1. Route the vehicle belt through the opening in the base labeled 'Belt Path' and buckle the
vehicle belt. Both the shoulder AND lap belt must be under the lock off.
2. Tighten belt while pressing base into vehicle seat.
3. While the shoulder belt is tight, hook the bottom of lock off and press to close the lock off
on the shoulder and lap belt.
1
2
3
click
Stokke® PIPA™ by Nuna®
EN 29 29