Optika Italy B-1000 MET Manual De Instrucciones página 8

4.0 UNPACKING AND ASSEMBLY
4.4 Halogen lamp insertion: Loosen the lock-screw on the top of the lamp case. Lift the cover of the lamp.
Do NOT touch the lamp glass with the bare hands.
The lamp will fit horizontally into the spring-holder. Pay attention to align the lamp coil to the center of
the collector lens as much as possible.
Put the lamp cover back in place.
4.5 Connect the lamp case to the power supply trough the provided 3-poles cable.
COLLECTOR LENS
Page 8