The Operation Procedure For Inputting Characters Manually - Pioneer BDP-120 Manual De Instrucciones

SETTINGS
The operation procedure for
inputting characters manually
NOTE
• Numeric characters such as IP address can be entered
on the input screen using the number buttons (0 to 9) or

and ENTER on the remote control.
IP Address 123
Netmask
Gateway
1
Press ENTER at the boxes in which characters
are to be entered, and the input screen will
appear.
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
Selected by
pressing 
2 Press  to select the desired input mode.
Input character list
Numeric
Edit
*
42
Selected by
pressing 
1 2 3 4 5 6 7 8 9 0
Cancel Left
The same operation as the RED, GREEN, YELLOW, BLUE buttons and
performed by selecting each of the items and pressing ENTER.
"Del.Char." stands for deleting characters.
Press the number buttons (0 to 9) or  to
3
select a number/character, then press ENTER.
4
Repeat the step 3 to display all of the desired
characters/numbers in the input field.
Example: The screen for inputting numeric characters
Numeric
Edit
NOTE
• Press RETURN (Del.Char.) to delete a number/
character you have input.
• To change a number/character you have input, press
GREEN (Left) or YELLOW (Right) to select the number/
character you want to change, and press
(Del.Char.). Then, press  to select a new number/
character you want to input, and press ENTER.
5
Press BLUE (Complete) to fix the numbers
which have been input.
IP Address
Netmask
Gateway
6
Repeat step 1 to 5 to finish inputting all the
required characters.
Right Complete Del.Char.
123
1 2 3 4 5 6 7 8 9 0
123
RETURN can be
RETURN