On-screen Error Messages
Messages Relating to BD disc and DVD disc
•
The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the
operation is not correct.
Error message
Cannot play.
Incompatible disc.
Cannot operate.
This USB memory is not formatted
properly. Please format the memory in
USB memory management.
The Connected USB Memory cannot
be used. It should be compliant with
USB 2.0.
Possible Error
•
The disc cannot be played back with
this Player.
•
If you load a disc which cannot be
played with this Player (i.e. a scratched
disc), or if you load a disc upside down,
this message will appear, and the disc
tray will automatically pop out.
•
Occurs if the loaded disc cannot be
played because it is a non-standard disc
or scratched, etc.
•
Occurs if an operation is incorrect.
•
Occurs if there is a formatting error.
•
Occurs if USB memory not compliant
with USB 2.0 High Speed (480Mbit/s) is
used (i.e. USB 1.0/USB 1.1).
Suggested Solution
•
Check the disc, and load it correctly.
•
Remove the disc.
—
•
Format the USB memory again.
•
Connect USB 2.0 High Speed
(480Mbit/s) compliant USB memory.
49