Hiding And Un-Hiding The Clock; Oven Use; Oven Functions; Oven Timer Operation - Teka HSC 644 C Manual De Usuario


If you wish to modify the time, press
or until the time starts flashing. Press
and follow the instructions in the
previous points.
In the event of power failure, the clock
settings will be erased and 12:00 will flash
on the clock display. Reset it and program
again.

OVEN FUNCTIONS


After setting the clock, the oven is ready
for use. Select a cooking function with
the function selector dial and
temperature with the temperature control
dial.
In models with an electronic temperature
control, when the selector switch is
turned, the display
temperature.
After selecting the temperature, the clock
will automatically reappear.

You will notice that the
up during cooking to indicate that heat is
being transmitted to the food. This
symbol disappears when the selected
temperature has been reached.

Set the controls to
will show the
symbol lights
to turn off the oven.

HIDING AND UN-HIDING THE CLOCK


If you wish to hide the clock press
5 seconds.

If you wish to see the clock on the
display again, press
When a cooking cycle begins, the oven
will automatically display the total the
time for the cycle progress, if the cooking
time or cooking stop time have not been
set.

OVEN TIMER OPERATION

Programing the buzzer
1. Touch or
the display starts flashing, then press
display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time
has been set and the clock will start
counting down from the selected time.
The symbol will flash slowly.
3. Once the time has expired, an acoustic
signal will sound for 90 seconds and the
symbol will flash quickly.
EN
for 5 seconds.
until the symbol on
0_00
or
for
. You
7