Removing The Oven Door; Technical Support - Teka FG-824.3 Instrucciones Para El Uso, Mantenimiento E Instalacion

All manuals and user guides at all-guides.com

REMOVING THE OVEN DOOR

To facilitate cleaning of the oven, the door can be removed as follows:
Hinges with moving bolts (fig. 16)
The hinges
A are provided with two moving bolts
B which lock the door in the open position when connected to elements
C. The door must then be raised and pulled out; to do this, grip the sides of the door near the
hinges. To refit the door, first slide the hinges into their grooves
D and then close the door. DO NOT forget to lower the two moving bolts B used to prop the
door open.
The glass door panel can be easily removed by unscrewing the 4 side screws (fig. 15).
N.B.: the screws must not be fully tightened as this can damage the gasket.
Accessories provided with the oven
The appliance can be provided with runners which must
be hooked to the oven wall. Slide the racks and tray
provided into the runners.
To remove the runners, simply press down (fig. 17).

TECHNICAL SUPPORT

If the appliance is not working properly, you are advised
to check the following before calling the Technical
Fig. 15
Support service:
check that the appliance is correctly plugged in;
check that the gas flow is regular and that the pipe is
not kinked or interrupted.
Fig. 16
Fig. 17
43