Cleaning - CASO DESIGN 1491 Operación Manual

Attention
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.
► Do not immerse the appliance in water or other liquids, and do not put it in the
dishwasher.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Do not use a sharp metal pusher
► Do not cut the food with a knife on the surface.
► Do not put the automatic temperature controller on the roasting surface of the pan. It
must not come into contact with the roasting surface of the pan.
► No cleansing agents (except liquid soap), nylon brushes or metallic brushes must be
used as the surface of the roasting surface of the pan could be damaged.
► Always clean the plate after having used it with a damp cloth as food leftovers or oil
sticked to the surface could adhere or bind.

15.2 Cleaning

After the use the Profi Party Pan has to be cleaned as follows:
name
Roasting Remove residues from cooking,
surface of the after the preparation by using a
pan soft cloth or a tissue while the
roasting surface of the pan is still
warm.
After cooling down cover the
holder to avoid that water enters.
After that clean the roasting
Excessive dirt
surface of the pan with a soft
cloth and a little dish liquid.
Lid Clean it with a soft sponge and
with a little dish liquid.
Automatic Clean it with a soft tissue or a
temperature dry, soft cloth
controller
method note
Do not use any cleansing agents
(except liquid soap), nylon brushes or
metallic brushes. The roasting
surface of the pan can be damaged.
Do not submerge the roasting
surface of the pan in water or do not
wash it with water while the plate is
still hot (risk of accident and risk of
injury)
Do not use thinner, fuel, cleansing
agents (except dish liquid) or
chemically treated cloths. The
surface will be damaged.
In order to prevent an electric shock
or a fire do not clean the construction
set of the automatic temperature
controller.
36