Removing Clogs - Panasonic MC-V7428 Instrucciones De Operación

Hose
Manguera
Tuyau

Removing Clogs

The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢ Unplug vacuum.
➢ ➢ Pull open suction inlet cover and
➢ ➢ Disconnect wand from short hose
Suction
➢ ➢ Plug in vacuum cleaner and turn on.
Inlet Cover
Cubierta de
aspiración
Couvercle
➢ ➢ Disconnect wand and stretch hose in
de l'entrée
d'aspiration
➢ ➢ If clog still exists, turn vacuum
Short Hose
Manguera
corta
Tuyau
court ➢ ➢ Turn vacuum over and inspect
- 34 -
check for clogging.
and check the wand and hose.
and out to remove clog.
cleaner OFF and UNPLUG POWER
CORD.
agitator area for clogs.