Pioneer VSX-S520D Manual De Instrucciones página 70

> Before Start > Part Names
outlet as this unit, this noise may be an effect from the
other unit. If the symptoms improve by unplugging the
power cord of the other unit, use different wall outlets for
this unit and the other unit.
When performing Full Auto MCACC, the message
"Noise Error" appears
0 This can be caused by a malfunction in your speaker
unit. Check if the unit produces normal sounds.
DRC function does not work
0 Make sure the source material is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, or DTS.
> Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
E
N
69