Bushnell Speedster Manual De Instrucciones página 6

GENERAL SWITCH OPERATION IN DETAIL
1. POWER (On/Off )
a. Is always active, regardless of which screen or mode the unit is in
b. Press to turn the unit on and off
c. Is an immediate power off, all DSP and radar activity ceases immediately
d. Unit will always return to the last setting used each time the device is turned on (SPEED or
SPEED + BASEBALL STATS) and UNITS (MPH OR KPH). The only exception to this:
The unit will always bring up the RESUME field within the SESSION line position.
2. TRIGGER (Activates Radar for Speed Measurement)
a. Press and hold to turn on the transmitter and perform speed processing. "RADAR
ACTIVE" Icon will be displayed at the top right corner of the LCD.
b. Release to turn off the transmitter and to lock display with current speed displayed
3. ENTER – all modes
a. When measuring speeds in SPEED and SPEED + BASEBALL STATS Modes
i) Used to accept current locked display speed and Average and Last speeds into the LCD
screen. Also accepts number of pitches while in the SPEED + BASEBALL Mode.
b. When making selections in SETUP screen
i) Used to select field options within SESSION, MODE, and UNITS
ii) Used to select field for edit within SESSION, MODE, and UNITS and accepts
the selection
( )
4. (Down Arrow)
a. SETUP and PLAYER EDIT Screens
i) Used to move down one line position
ii) Used to decrement/change selected parameter when editing a field and PLAYER
b. SPEED + BASEBALLSTATS Mode
i) Used to increment BALL count
( )
5. (Up Arrow)
a. SETUP and PLAYER EDIT Screens
i) Used to move up one line position
ii) Used to increment/change selected parameter when editing a field
b. SPEED + BASEBALL STATS Mode
i) Used to increment STRIKE count
6. PAGE
a. Use to page (scroll) through screens
b. Will update memory with currently displayed information when in SETUP or PLAYER
EDIT screens before scrolling to next page
NOTE: The Speedster contains an automatic battery saving shut-off feature. After 30 minutes
of non-use, the Bushnell Speedster will automatically shut off.
The Speedster automatically saves data for later use to internal memory while in the "SPEED +
BASEBALL STATS" Mode. Data captured in the "SPEED" only mode can not be saved to
internal memory.
9
SETUP SCREEN SWITCH OPERATION IN DETAIL
( )
1. (Up Arrow)
a. Selects Line Position (SESSION, MODE, UNITS)
i) Moves up one line position if no field has been selected for editing (Current line position
will be shown in reverse image text).
ii) Increment/changes field if field has been selected for editing (both line position AND
field will be shown in reverse image text).
( )
2. (Down Arrow)
a. Selects Line Position
i) Moves down one line position if no field has been selected for editing (Current line
position will be shown in reverse image text).
ii) Decrement/changes field if field has been selected for editing (both line position AND
field will be shown in reverse image text)
3. ENTER
a. Selects field to be edited
b. Accepts and saves current value displayed in field
4. PAGE
a. Will accept and save all choices currently displayed on the SETUP screen
b. Will scroll to the next screen
c. Next screen displayed determined by operation choices
5. TRIGGER (Activate Radar)
a. Has no effect while in SETUP screen
6. POWER (On/Off )
a. Will power unit on or off
PLAYER EDIT SCREEN SWITCH OPERATION IN DETAIL
( )
1. (Up Arrow)
a. Select Pitcher / Balls / Strikes
i) Moves up one line position if no field has been selected for editing (Current line position
will be shown in reverse image text)
ii) Increment Pitcher number / Balls / Strikes if field has been selected for editing
(1) Maximum Player choice is 8
(2) Maximum count is 999
( )
2. (Down Arrow)
a. Select Pitcher / Balls / Strikes
i) Moves down one line position if no field has been selected for editing (Current line
position will be shown in reverse image text)
ii) Decrement Pitcher number, Balls, Strikes, if field has been selected for editing
10