Installing Circuitry - Festo EGSL Instrucciones De Utilizacion

EGSL
If proximity sensors are used as hardware limit switches:
• Use proximity switches with normally-closed function.
The normally closed function protects the EGSL against overrunning the end
position if the proximity sensor cable is broken.
• Avoid external influence caused by strong magnetic fields or ferrite parts
in the vicinity of the proximity sensors. The minimum distance is summarised
in the table below:
EGSL-...
Minimum distance
Fig. 10
If proximity sensors are used as reference switches:
• Use the proximity sensors corresponding to the input of the controller used
(è catalogue specifications, www.festo.com/catalogue).
To prevent soiling:
• Use the slot covers from our catalogue.
Festo EGSL 1602b English
35
[mm] 20
45 55
25 20
75
40
27