Service And Maintenance; Disassembly And Repair - Festo EGSL Instrucciones De Utilizacion

EGSL
If the motor turns in the wrong direction:
Note
When the motor is removed
(e.g. turning the motor) the reference
position is lost.
• Start a reference run as detailed in the
chapter 6 "Commissioning", in order to
reference the new positioning cycle.
8

Service and maintenance

Warning
Controller signals can cause the EGSL to make unintented movements.
• Switch off the controller before any work on the EGSL and secure the
controller to prevent it from being switched on again.
On cleaning and maintenance:
• If necessary, clean the EGSL with a soft cloth.
Cleaning agents: Any gentle detergent
9

Disassembly and repair

• Recommendation: Send the product to our repair service.
The necessary fine adjustments and tests will then be taken especially into
account.
30
Fig. 13
Festo EGSL 1602b English