Installing The Pneumatic System - Festo DSMI-B Serie Instrucciones De Utilizacion

DSMI-...-B

Installing the pneumatic system

Note
Uncontrolled operation without positioning controller and without additional
external one-way control valves will destroy the DSMI, even if it is pressurised
only once for test purposes.
• Note that the DSMI does not have any flow control for the pneumatic
connections.
The DSMI may only be used without external one-way control valves in
electronically controlled operation in combination with a positioning
controller.
For electronically closed-loop control of the DSMI in combination with a
positioning controller:
Note
Special installation specifications apply to the electronically controlled
operation.
• To install the pneumatic system, please observe the instructions in the
descriptions of the positioning controller.
• Connect the tubing of the DSMI with the
proportional directional control valve
according to the colour codes of the con-
nections.
– Black release ring (looking at the stop
lever, it swivels in clockwise direction).
– Blue release ring (looking at the stop
lever, it swivels in anticlockwise
direction).
32
Fig. 17
Festo DSMI-...-B 1210b English