Master & Dynamic MW50 Manual De Usuario página 10

PAIRING
• Hold in
light will pulse when headphone is
in pairing mode.
Pairing
• Access Bluetooth
on your source device. Locate
MW50 and connect. A solid light
indicates you are connected.
Connected
If no connection is made after 2 minutes,
the headphone will enter deep-sleep mode.
Cycle power switch to awaken.
18
EN
position for 2 seconds,
settings
®
PAIRING TO 2 DEVICES
How to pair with two devices
1 Enter pairing mode
2 Connect to device 1
3 Enter pairing mode again
4 Device 1 will disconnect
5 Connect to device 2
6 Turn headphone off Turn headphone off
7 Turn headphone on, headphone
will automatically connect to
device 1 and 2 simultaneously
8 Pause one device and play
from the other to swap
headphone connection
EN
19