Settings - Anker NEBULA Capsule Max Manual De Usuario

EN

Settings

Go through the setup process when you power on Nebula Capsule Max
for the first time.
1. Network
This projector can be connected to the Internet via a wireless (Wi-Fi)
connection.
① On the home menu, select [Network] and press
② Follow the on-screen instructions to complete the network
connection.
2. Bluetooth
Bluetooth Speaker Mode
You can use this projector as a standalone Bluetooth speaker.
① Press
to switch to Bluetooth speaker mode.
② Enable Bluetooth on your smartphone and select [Nebula-XXXXXX]
as the device to be connected.
Projector Mode
You can connect a Bluetooth speaker or pair of headphones to Nebula
Capsule Max while in projector mode.
① Press
to access the home menu, select [Settings] > [Bluetooth]
and press .
② Follow the on-screen instructions to complete the Bluetooth
connection.
13
3. Projector
Press
press
[Image Mode]
[Color Temperature]
[Auto Keystone Correction] Enable / disable auto keystone correction.
.
[Vertical Keystone
Correction]
[Horizontal Keystone
Correction]
[Quadrilateral Keystone
Correction]
[Auto Focus Correction]
[Projector Mode]
to access the home menu, select [Settings] > [Projector], and
.
[Auto] / [Standard Mode] / [Battery Mode]
[Normal] / [Cool] / [Warm]
When the Auto Keystone Correction is Off,
manually adjust the vertical keystone value.
When the Auto Keystone Correction is Off,
manually adjust the horizontal keystone
value.
When the Auto Keystone Correction is Off,
manually adjust the quadrilateral keystone
value.
Enable / disable auto focus.
[Front Projection]: The projector is located
in front of the projection surface.
[Rear Projection]: The projector is located
behind the projection surface.
[Inverted Front Projection]: The projector
is hanging from the ceiling in an upside
down position. The image is rotated by
180 degrees.
[Inverted Rear Projection]: The projector is
hanging from the ceiling in an upside down
position behind the projection surface.
The image is rotated by 180 degrees and
horizontally mirrored.
EN
14