Ordering Information - EMKO RS Pro ESM-3711-CN Manual De Instrucciones

10.Ordering Information

(77x35 DIN Size)
A Supply Voltage
3
24V
4
115V
5
230V
10 - 30 V Z
8
BC Input Type
PTC (Note-1)
12
NTC (Note-1)
18
E
Compressor Output
1 Relay Output ( 16(8) A@250 V V at resistive load, 1 NO )
Temp. Sensor which is given with ESM-3711-CN
V
None
0
1 PTC-M6L40.K1.5 (PTC Air Probe with 1.5 mt silicon cable)
2 PTCS-M6L30.K1.5.1/8" (PTC Liquid Probe with1.5 mt silicon cable)
NTC-M5L20.K1.5 (NTC Sensor, thermoplastic moulded with
3
NTC-M6L50.K1.5 (NTC Sensor, stainless steel housing with
4
Customer
9
All order information of ESM-3711-CN Cooling Controller are given on the table at left. User may form
appropriate device configuration from information and codes that at the table and convert it to the
ordering codes. Firstly, supply voltage then other specifications must be determined. Please fill the order
code blanks according to your needs.
Please contact us, if your needs are out of the standards.
Note-1:If input type is selected PTC or NTC (BC= 12, 18), Temperature sensor is given with the
device.For this reason, if input type is selected as PTC,sensor type (V = 0,1 or 2) or if input type is
selected as NTC, sensor type (V = 0,3 or 4) must be declared in ordering information.
11.Optional Accessories
1.RS-485 Module
RS-485 Communication Interface
Your Technology Partner
A BC D
ESM-3711-CN
V ±
( %15) 50/60Hz - 1.5VA
V ±
( %15) 50/60Hz - 1.5VA
V ±
( %15) 50/60Hz - 1.5VA
1.5 m cable for cooling application)
1.5 m cable for cooling application)
c V Ş Vac,
Z Ş Vdc
W
Ş Vdc or Vac can be applied
Thank you very much for your preference to
use Emko Elektronik products, please visit our
web page to download detailed user manual.
E / FG HI / U V W Z
0 / 00 00 / 1
Scale(°C)
-50°C/-58°F ; 150°C/302°F
-50°C/-58°F ; 100°C/212°F
2.PROKEY Programming Module
The device is programmed(Upload or
Download) by using the parameters.
www.emkoelektronik.com.tr
0 0
16