Preparation for installing the unit
5. Preparation for installing the unit
When deciding the location of the unit and planning your installation, you must follow a set of guidelines based on
the specifications of the unit. These guidelines are summarized in this chapter.
5.1. Environment
•
These units can be installed indoors and outdoors.
•
Place the units in a place which is accessible for installation and maintenance work and which permits
use of the keyboard and the reading of the front indicator LEDs.
•
Avoid corrosive environments that may affect the proper operation of the inverter.
•
Never place any object on top of the unit.
•
Do not expose the inverters to direct sunlight.
•
Do not install the units in inhabited rooms. The inverter produces a slight buzz when in operation.
•
If more than one inverter is installed, make sure the hot air extraction of one does not interfere with the
correct ventilation of another.
•
Keep the following distances free of obstacles.
5.2. Environmental conditions
Environmental operating conditions indicated in section "2.7. Specifications tables" must be taken into account
when choosing the location of the unit.
ABF2013IQM01_ - Installation and Operation Manual
20 in (≈ 50 cm )
12 in (≈ 30 cm )
12 in (≈ 30 cm )
Ingeteam
EN
ES
19