Opening And Closing The Housing - Ingeteam INGECON SUN 1Play HF U Manual De Instalacion Y Uso

Installing the unit

6.3. Opening and closing the housing

To access the inside of the unit open the cover of the housing by removing the four front screws.
After making the different connections explained in the sections below, close the unit before starting it. To close
the housing, tighten the aforementioned screws, applying a torque of 53.1 lb.in (6 Nm).
Check that the unit is correctly closed before starting up the unit.
ABF2013IQM01_ - Installation and Operation Manual
Ingeteam
EN
ES
23