Thinning Hair; Trimming Beards; Cleaning And Care - Silvercrest HG02124A Instrucciones De Utilización Y De Seguridad

Comb attachment
(mm)
Note: Ensure that you move the product away
from the hairline and slowly push it downwards.
Note: The scissors
18
additional styling.

Thinning hair

Note: Using this function you can reduce the
volume of the hair by collecting and cutting only
some of it off.
Place the thinning attachment
duct as described in the chapter „Changing
the attachments."
Note: The thinning attachment
every hair from being cut.

Trimming beards

Note that the desired trim length can only be
achieved if the product is held perpendicularly
to the skin's surface.
Comb the beard using the supplied comb
in its direction of growth.
Shorten the beard downwards from the ear to
the chin, one side after the other.
Use the cutting unit
attachment to trim the beard very short or
11
to trim a moustache or hairline.
Graduate the desired trim length by rotating
the lower part of the product
length position indicator
24 GB/IE
Trim length
(mm)
3.0
6.0
9.0
12.0
20.0
30.0
supplied may be used for
onto the pro-
12
prevents
12
without the comb
1
according to
5
. The trim length
4
Trim length with accurate trim adjustment
0.8 1.1
3.8 4.1
6.8 7.1
9.8 10.1
12.8 13.1
20.8 21.1
30.8 31.1
may be set to 5 different levels (0.8 mm /
1.1 mm / 1.4 mm / 1.7 mm / 2.0 mm).
To trim a moustache, firstly comb it straight
downwards. Begin in the centre above the
mouth, then one side and then the other.

Cleaning and care

CAUTION! DANGER TO LIFE BY ELECTRIC
SHOCK! Pull the plug-in mains adapter
out of the mains socket before cleaning the
product.
Never touch the plug-in mains adapter
moist or wet hands, especially when you plug
it into the socket or pull it out of the socket.
Always keep the plug-in mains adapter
and supply cord dry.
CAUTION! RISK OF PROPERTY DA-
MAGE! Do not submerge the product in
water or any other liquid to clean it as the pro-
duct is not waterproof. This could damage the
live parts (rechargeable batteries).
Do not use any corrosive or abrasive cleaning
agents.
17
Clean the housing and the charging base
using a damp cloth and a mild detergent.
Switch the product off by sliding the ON / OFF
switch to the „0" position.
3
Disconnect the supply cord from the product
and remove the plug-in mains adapter
the mains socket.
(mm)
1.4 1.7
4.4 4.7
7.4 7.7
10.4 10.7
13.4 13.7
21.4 21.7
31.4 31.7
2.0
5.0
8.0
11.0
14.0
22.0
32.0
7
with
7
7
6
from
7