USING THE END OF COOKING TIMER
USE OF THE ELECTRONIC PROGRAMMER
HOW TO ACTIVATE IT HOW TO SWITCH IT OFF
FUNCTION
• Press and hold the
button
• Press the buttons
MINUTE MINDER
to set the required time
• Release all the buttons
• Press the button
MANUAL
• Set the cooking function
FUNCTION
with the oven function
selector
• Press and hold the
TIMER button
• Press the buttons
to set the lenght of coo-
COOKING
king required
TIME
• Release all buttons
• Set the cooking function with
the oven function selector
• Press and hold the END
button
• Press the buttons
to set the time at which you
END OF
wish the oven to switch off
COOKING
• Release the buttons
• Set the cooking function
with the oven function
selector
SETTING THE CORRECT TIME
ATTENTION the oven only operates if set on manual function
N.B.: on some models the symbols
This control enables to set the desired cooking time (max. 120 min.) the oven will automatically switch
off at the end of the set time.
The timer will count down from the set time return to the O position and switch off automatically.
For normal use of oven set the timer to the
To set the oven ensure the timer is not on the O position.
• When the set time as
elapsed an audible alarm
or
is activated (this alarm will
stop on its own, however
it can be stopped
immediately by pressing
the button)
• Turn the oven function
selector to position O.
• When the time is elapsed
the oven will switch off
or
automatically. Should you
wish to stop cooking
earlier either turn the
function selector to 0, or
set time to 0:00
(TIMER and
• At the time set, the oven
will switch off. To switch
off manually, turn the
oven function selector
to position O.
WARNING : the first operation to carry out after the oven has been
installed or following the interruption of power supply (this
is recognizable the display pulsating and showing
is setting the correct time. This is achieved as follows
• Press and hold the TIMER and END buttons
• Set time with
buttons
• Release all buttons
are replaced by + and - .
position.
WHAT IT DOES
• Sounds an alarm at the
end of the set time.
• To check how long is
left to run press the
button
• Enables you to operate
the oven.
• It allows to preset the
cooking time required
for the recipe chosen
• To check how long is
left to run press the
TIMER button.
• To alter/change the
buttons)
preset time press
TIMER and
• Enables you to set the
end of cooking time
• To check the preset
time press the END
button
• To modify the preset
time press buttons
END +
(
and
or preset time.
9 GB
WHAT IT IS FOR
• Allows to use the oven as
alarm clock (could be
activated either with
operating the oven or
with out operating the
oven)
• For cooking the desired
recipes
• At the end of the
cooking set time,
the oven will switch
off automatically and an
audible alarm will ring.
buttons
• This function is typically
used with "cooking time"
function. For example
if the dish has to be cooked
for 45 minutes and needs
to be ready by 12:30,
simply select the required
function, set the cooking
time to 45 minutes and the
end of cooking time to
12:30.
• Cooking will start automa-
tically at 11:45 (12:30
minus 45 mins) and will
continue until the pre-set
end-of-cooking-time, when
)
the oven will switch itself
off automatically.
)
WARNING.
If the END of cooking is
selected without setting
the length of cooking time,
the oven will start cooking
immediately and it will
stop at the END of
cooking time set.