Bestron AES800 Manual Del Usuario página 27

OPERATION - General
The expresso machine is only intended for household use.
1. Indicator light
2. Selector switch
3. Filter
4. Filter holder
5. Locking clip
6. Filter holder handle
7. Drip plate
8. Drip tray
9. Water reservoir cap
10. Steam nozzle
11. Protective nozzle
12. Jug
OPERATION - Before first use
1. Remove the packaging.
2. Clean the device. See 'Cleaning and maintenance'.
NOTE:
If the machine is new or you have not used it for a long time, first use it two or three times with just water,
no coffee. Please follow the regular user instructions below. Throw away the water afterwards.
OPERATION - Preheating
To make a good hot espresso, we recommend preheating the machine (the filter holder, the filter and the
cup) so that the coffee taste cannot be affected by the cold parts.
1. Twist the cap (9) off the water reservoir and fill it with up to 240 ml of water. Use the jug with the
scaling for this. Firmly close the cap.
2. Place the filter (3) in the filter holder (4). Then insert the filter holder into the unit from the INSERT
position and turn to the LOCK position.
3. Place the jug (12) on the drip plate (7).
4. Then connect the device to an electrical outlet. Make sure the selector switch (2) is in the OFF
position.
5. Move the selector switch to the ESPRESSO position (left). The indicator light (1) turns on.
The brewing process begins. After some time, the jug fills up with hot water.
Note: hot steam is generated during brewing! Parts of the device also get hot. Don't burn yourself!
6. Turn the selector switch to the OFF position when there is no more water coming out of the device.
The indicator light turns off. The device is now preheated.
7. Pour the hot water from the jug into the cups.
6 5 3
12
7
27
4
9 1
EN
2
10/11
8