Product Features; Noise/Vibration Information - Bosch PKS 54 Manual Original

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Safety switch for On/Off switching
2 Thumbwheel for speed preselection
(PKS 54 CE/PKS 66 CE)
3 On/Off switch
4 Auxiliary handle
5 Spindle lock button
6 Allen key
7 Scale for mitre angle
8 Wing bolt for bevel-angle preselection
9 Wing bolt for parallel guide
10 Cutting mark, 45°
11 Cutting mark, 0°
12 Parallel guide
13 Retracting blade guard
14 Riving knife

Noise/Vibration Information

Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
tainty K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
Bosch Power Tools
2
<2.5 m/s , Uncer-
h
15 Base plate
16 Wing bolt for bevel-angle preselection
17 Blade guard
18 Sawdust ejector
19 Clamping bolt with washer*
20 Clamping flange
21 Saw blade*
22 Mounting flange
23 Saw spindle
24 Clamping lever for cutting-depth preselec-
tion
25 Cutting-depth scale
26 Screw for attachment of riving knife
27 Set of screw clamps*
28 Guide-rail adapter*
29 Guide rail*
30 Connection piece*
31 Vacuum hose*
*The accessories illustrated or described are not in-
cluded as standard delivery.
dB(A)
dB(A)
dB
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
English | 23
PKS 54 PKS 66
PKS 54 CE PKS 66 CE
96 94
107 105
3 3
1 609 929 N30 | (4.2.08)