í
Shooting Images Sequentially
The Sequential Shooting mode allows you to take a rapid succession of still images by
pressing and holding the shutter button. You can choose the best image from a series
of sequential shots. When you have found your best shot, you can also erase the rest
of the images.
Operating Procedure
1.
Check that the lens barrier is open.
2.
Press the
OK/menu button.
¼ The monitor shows the Shooting mode
menu 1/3.
3.
Select
/
by pressing the
key.
4.
Select
by pressing the
5.
Press the
OK/menu button.
¼ The Sequential Shooting mode is engaged and
displayed on the monitor.
6.
Press and hold the shutter button.
¼ Multiple images will be shot in rapid succession for as
long as your keep the button pressed.
7.
Close the lens barrier and open it again to restore the
default Single-Frame Shooting mode.
CAUTION ..................................................................................
Do not open the card cover or remove the AC adapter, batteries or card while the
orange lamp on the right of the viewfinder is blinking. Otherwise, the data on the card
may be destroyed.
SELECT
Shooting mode menu 1/3 screen
or
arrow pad
or
arrow pad key.
(Sequential Shooting)
1 /3
AUTO
OFF
DIGITAL ZOOM
OFF
END
OK
OK/menu button
1 /3
DIGITAL ZOOM
SELECT
Shooting mode menu 1/3 screen
is
Sequential Shooting mode
21
Arrow pad
AUTO
OFF
OFF
END
OK