Varying The Image Brightness (Exposure Compensation) - Olympus CAMEDIA C-1 Zoom Manual Básico

22
í
Varying the Image Brightness
Although the camera's exposure is set automatically, you can vary it to change the
image brightness in the range of ±2 stops in 0.5-stop steps.
Operating Procedure
1.
Check that the lens barrier is open.
2.
Press the
¼ The monitor shows the Shooting mode
menu 1/3.
3.
Press the
Shooting mode menu 2/3, and then select
4.
Select a + value (to brighten image) or – value (to
darken image) by pressing the
5.
Press the
¼ The camera returns to the Shooting mode and the
monitor shows the corrected exposure value.
6.
Press the shutter button.
¼ Images can be shot successively while maintaining the
corrected exposure value.
7.
Close the lens barrier to turn the camera off.
¼ The exposure value is reset to ±0 (no correction).
The exposure compensation value on the monitor goes
out.
OK/menu button.
or arrow pad key to display the
OK/menu button.
(Exposure Compensation)
1 /3
DIGITAL ZOOM
SELECT
Shooting mode menu 1/3 screen
.
or arrow pad key.
Arrow pad
AUTO
OFF
OFF
END OK
OK/menu button
2 /3
HQ
AUTO
ON
SELECT END
Shooting mode menu 2/3 screen
2 /3
+ 1.5
HQ
AUTO
ON
SELECT END
Shooting mode menu 2/3 screen
Corrected exposure value
OK
OK