GB
IRL
8.
Press the pump handle [13] down and turn it clockwise.
9. Generate the required pressure
☞
10. Press the pump handle [13] down and turn it counterclockwise.
Ensure that the initial pressure is not higher than 15 bar.
9. When the required pressure has built up
[17].
Spraying
Observe the instructions in the section entitled "Safety".
Operate the device only while it is vertical or suspended upright and nearly vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Observe the instructions of the spray product manufacturer!
1. Suspend the device from your shoulder or place it on your back.
☞
2. Activate the shut-off valve [9]
3. Make certain the optimum spraying pressure is set
[16].
Spraying pressure
Table 2. Dependence: spraying rate and spraying pressure
pump some more.
☞
AUS
USA
.
Spraying rate with fan jet nozzle
0.56 l/min
0.64 l/min
0.78 l/min
16
NZ
.
in the tank [1]
.
, remove the compressed-air hose
CDN
IND
.
on the pressure gauge
.