General Specifications - Klein Tools ET16 Manual De Instrucciones

ENGLISH

GENERAL SPECIFICATIONS

Klein Tools ET16 is a borescope with a 0.35 in. (9 mm) camera
surrounded by 6 LEDs and attached to a 10 ft. (3.05 m) armored
gooseneck. ET16 has USB Type C and micro-USB connections for
most Android smart phones and devices. The camera output is
®
displayed on the Android device using the Klein Tools Borescope
®
App, available at kleintools.com.
• Operating Altitude: 6562 ft. (2000 m)
• Relative Humidity: <85% non-condensing
• Operating/Charging Temperature: 32°F to 122°F (0°C to 50°C)
• Storage Temperature: 14°F to 140°F (-10°C to 60°C)
• Controller Dimensions: 3.7" x 1.2" x .94" (94 mm x 30 mm x 24 mm)
• Weight: 1.12 lbs (0.51 kg)
• Camera Output: 640 x 480 pixels
• Camera Frames per Second: 25
• Camera Gooseneck Length: 10 ft. (3.05 m)
• Pollution degree: 2
• Ingress Protection: Camera: IP67 dustproof & waterproof
• Drop Protection: 6.6 ft. (2 m)
Specifications subject to change.
2
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
To ensure safe operation and service of the instrument, follow
these instructions. Failure to observe these warnings can result in
serious personal injury, fire, or electrical shock.
• The borescope, including the camera end, is NOT insulated. Avoid
probing areas where energized conductive elements may be
present. Shut off power to nearby work areas before starting work.
• DO NOT probe moving machinery that could catch the borescope
and/or camera end, and cause harm to the operator and the
Borescope.
• NEVER completely immerse the camera in water or liquids. DO
NOT use the borescope for underwater inspections.
• Avoid probing areas where chemicals may be present.
• NOT intended for use on people or animals.
• DO NOT use near sources of heat.
• Keep steady footing at all times, following ladder safety procedures
when necessary.
• DO NOT use if the USB Type-C connector, Micro-USB connector/
adapter, or borescope housing is damaged in any way.
• No user-serviceable parts inside. DO NOT open or attempt to repair.
WARNINGS
NOTE
3