Quick Start Guide; Installation And Setup - Brady BBP 33 Guia De Inicio Rapido

Quick Start Guide

Unpacking
Verify that all of the items shown are in the box. If an item is
missing or appears to be defective, contact Brady technical
support immediately.
Included in the Box
• Printer
• Product CD
• Printer Driver CD
• Power Cord
• Accessories Kit
Components
1 Enclosure Cover
3 Media Guides
5 Ribbon Cartridge
7 Ribbon Cartridge Latch 8 Brady Network Card
9 Expansion Ports
11 Power button
13Ribbon Cover Latch
*See User's Manual for component descriptions.
1
2
3
4
5
6
13
®
BBP 33 Sign & Label Printer Quick Start Guide
• USB Cord
• Quick Start Guide
• Cleaning Kit*
*Not available in all regions.
2 Label Exit/Tearoff Bar or
Auto Cutter*
4 Media
6 Ribbon Cover
10Media Wiper
12Media Bridge*
11
12
10
9
7
8

Installation and Setup

Refer to the User's Manual, located on your product CD for
more detailed information.
Connecting Power
1. Remove printer and power cord from packaging box.
2. Plug power cord into printer and into AC power outlet. Printer
automatically powers on.
3. After initial start, press Power
Installing Media
1. Open enclosure cover.
2. Release ribbon latch and swing ribbon cover open.
3. Move yellow media wiper away from media.
4. Move yellow media guides to full-open.
5. Insert media cartridge until spindle ends rest in slots of media
holder (touch cell is on left-side of cartridge).
6. Feed media from top of roll until it sits in the middle of the
black rubber roller.
7. Close media guides until they touch edge of media liner with
media under the guides. Arrows on the guides should line up
with edge of liner.
8. For continuous media, move media wiper into position so it
rests on media.
3
4
6
Installing Ribbon
1. Place ribbon cartridge with ribbon over print head (product
label toward machine), then snap into place.
2. Close and latch ribbon cover, then close enclosure cover.
to apply or remove power.
5
1
11