General Safety Notes - Testboy 26 Instrucciones De Empleo

Notes
Notes
Safety notes
WARNING
Sources of danger are mechanical parts, for example, which can cause serious per-
sonal injury.
Objects are also at risk (e.g. damage to the instrument).
WARNING
An electric shock can result in death or serious personal injury, and also functional
damage to objects (e.g. damage to the instrument).
WARNING
Never point the laser beam towards the eyes directly or indirectly, via reflective sur-
faces. Laser radiation can cause irreparable damage to the eyes. The laser beam
must be deactivated when measuring close to people.

General safety notes

WARNING
Unauthorised modification and/or changes to the instrument are not permitted, for
reasons of safety and approval (CE). In order to ensure safe and reliable operation
using the instrument, you must always observe the safety instructions, warnings and
the information contained in the section "Intended use".
WARNING
Please observe the following information before using the instrument:
Do not operate the instrument anywhere near electrical welders, induction heat-
|
ers or other electromagnetic fields.
Further to abrupt temperature fluctuation, the instrument must be allowed to ad-
|
just to the new ambient temperature for approx. 30 minutes before using it, in or-
der to stabilise the IR sensor.
Do not expose the instrument to high temperatures for a long period of time.
|
Avoid dusty and humid environments.
|
| Measuring instruments and their accessories are not toys, and must be kept out
of the reach of children!
| In industrial facilities, the accident prevention regulations for electrical systems
and equipment, established by the employer's liability insurance association,
must be observed.
The parts or accessories of the device must only be changed or replaced in
|
agreement with the manufacturer or their representative.
A continuity check is not possible because the sound signal can be conducted
|
via the break point of the line.
10
®
Testboy 26