Declaration Of Conformity - Testboy 26 Instrucciones De Empleo

Please contact:
Testboy GmbH
Elektrotechnische Spezialfabrik
Beim Alten Flugplatz 3
D-49377 Vechta
Germany
Certificate of quality
All activities and processes carried out within Testboy GmbH relating to quality are monitored
permanently within the framework of a Quality Management System. Furthermore, Testboy
GmbH confirms that the testing equipment and instruments used during the calibration process
are subject to a permanent inspection process.

Declaration of conformity

The product conforms to the actual directives. For more detailed information go to
www.testboy.de
Operation
Thank you for purchasing the Testboy
The cable detector has been developed to find or trace individual wires and pairs of wires individ-
ual wires without damaging the insulation. Only cables or lines must be connected that are deen-
ergized.
| The device operates using a sound generator for safe identification of lines
Volume control for adaptation of the sensitivity and ambient conditions
|
Protected switch, in order to prevent discharging the battery
|
| Transmitter and receiver
Integrated LED flashlight
|
| Maximum length of cable up to 8 km (unloaded)
Before using, read these instructions. If the instrument is not used as intended by
the manufacturer, the protection already provided can be influenced.
®
Testboy 26
Tel: 0049 (0)4441 / 89112-10
Fax: 0049 (0)4441 / 84536
www.testboy.de
info@testboy.de
26 .
®
Operation
13