For 600 And 800 Va Models - ABB PowerValue 11 LI Up Manual De Usuario

68
—
3.2.1-1: PowerValue 11
LI 600-800VA battery
replacement procedure
en
A B B U P S P R O D U C T S A N D S O L U T I O N S
3 .2 .1

For 600 and 800 VA models

1. Power off the UPS and disconnect all input/output AC/DC power cords and connections.
2. Loosen the screws that hold the bottom battery panel (A).
3. Remove the bottom battery panel (A).
4. Swipe out the battery (B).
5. Disconnect the battery wires (C).
6. Dispose of the battery properly (B).
7. Take the fresh battery (B).
8. Make sure the red wire is secured to the red battery pad and the black wire to the black battery
black pad, and reconnect the battery wires (C).
9. Insert the new battery into the unit (B).
10. Reinstall the front panel (A).
11. Fasten the screws (A).
12. Reconnect all cables and switch on the UPS.
—
3.2.1-1
B
A
C
C
+
-
B