Filter Replacement; Filter Cleaning And Replacement Cycles; Resetting The Filter Replacement Indicator; Forcible Reset Mode - Coway AP-0510IH Manual De Instrucciones

FILTER REPLACEMENT

- Check that the 'front' sides of filters are in the correct direction.
- To maintain optimal performance of the product, use original Coway filters.
Tips
- Always unplug the air purifier before replacing filters.

Filter cleaning and replacement cycles

Filter
Pre-filter
Deodorization filter
True HEPA filter
- Each service life is based on 8-hour use in maximum air speed.
- The recommended filter replacement cycles may differ depending on the operating environment.

Resetting the filter replacement indicator

1. After replacing filter, turn on the power.
2. To begin reset mode, press and hold the reset button for approximately 2 seconds.
3. Select replaced filter, press and hold the reset button for approximately 2 seconds again.

Forcible Reset Mode

When you have replaced a filter before the filter replacement cycle is reached, you can forcibly
reset the filter replacement cycle back to the factory default setting.
1. When the reset function is not activated, press and hold the reset button for 2 seconds.
2. Press the reset button to select the desired filter to forcibly reset.
Press once : Odor LED (Deodorization Filter)
Press twice : HEPA LED (True HEPA filter)
3. After you select the filter to reset, press and hold the reset button for 2 seconds. And then,the
accumulated time in electronic time counter is erased.
- If there is no input for 10 seconds in forcible reset mode, the reset mode is cancelled.
Cycles
Every 2~4 weeks
1 year
3 years
Method
Cleaning
Replacement
Replacement
10