Safety Instructions; Safety Signal Words - Atlas Copco G2588-230-M14 Instrucciones De Producto

G2588-230-M14
Safety and operating instructions

Safety instructions

Important information for safe use
Our goal is to produce tools that help you work safely and efficiently.
The most important safety device for this and for any tool is YOU.
Your care and good judgement are the best protection against injury.
This power tool must not be modified for product liability and safety reasons.
Only qualified and trained operators should install, adjust or use this tool.
All possible hazards cannot be covered here, but we highlight some of the most
important. For additional safety information consult:
• Other documents and information packed with this tool
• Your employer, union and/or trade association
• Appropriate standards as referred to in the Section EC Declaration of Con-
formity
Further occupational health and safety information can be obtained from the
following web sites:
http://www.osha.gov (USA)
http://europe.osha.eu.int (Europe)

Safety signal words

The safety signal words Danger, Warning, Caution, and Notice have the follow-
ing meanings:
DANGER
WARNING
CAUTION
NOTICE
EN
These instructions concern installation, operation,
handling and maintenance of product, inserted/
mounted tool and equipment.
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indi-
cates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE is used to address practices not related to
personal injury.
© Atlas Copco Industrial Technique AB - 9836 988900 00
Safety and operating instructions
• It is vital that the operator has read and fully un-
derstood the instructions before using this product
• Keep instructions safe for future reference and
make sure that the operator has complete access to
them
• Failure to follow these instructions may cause se-
rious hazards
3