Atlas Copco G2588-230-M14 Instrucciones De Producto página 5

G2588-230-M14
Installation, Operation and Maintenance: precautions
WARNING Explosives and explosive gases, explosion hazard
If the product comes into contact with explosives, an explosion could occur.
Explosions can lead to serious injuries or death.
Sparks can fly when operating the product, these can detonate highly
flammable dusts and gases and lead to fire or explosions.
Never operate the product near explosives
►
Never work in a highly flammable or explosive environment
►
Make sure there are no hidden gas sources in your working area
►
WARNING Electric shock
Should the product come in contact with electric circuits or other electrical
power sources, there is a risk of serious injury or death.
Never work near electric circuits or other electrical power sources
►
Make sure there are no hidden electric circuits in your working area
►
WARNING Dust hazard
Some dust, fumes or other airborne material created by power sanding, saw-
ing, grinding, drilling and other constructions activities contains chemicals
known to the State of California to cause cancer and birth defects or other re-
productive harm. Some examples of such chemicals are:
Crystalline silica and cement and other masonry products.
Arsenic and chromium from chemically-treated rubber.
Lead from lead based paints.
To reduce your exposure to these chemicals, work in a well ventilated
►
area, and work with approved safety equipment, such as dust masks that
are specially designed to filter out microscopic particles
Avoid inhaling dust or handling debris from the work process which can
►
be harmful to your health
Use dust extraction e.g. spot suction equipment and wear respiratory pro-
►
tective equipment when working with materials which produce airborne
particles
Potentially explosive atmospheres can be caused by dust and fumes re-
►
sulting from sanding or grinding. Always use dust extraction or suppres-
sion systems which are suitable for the material being processed
WARNING Projectiles
During power sanding, sawing, grinding, drilling and other construction ac-
tivities sparks, chips, wheel fragments or other particles may turn into pro-
jectiles and cause bodily injury by hitting the operator or other persons.
Even small projectiles can injure your eyes and cause blindness.
Always wear impact-resistant eye and face protection when engaging in
►
or working near the operation, repair or maintenance of the tool or chang-
ing accessories on the tool
Use barriers to protect others from wheel fragments and grinding sparks
►
Check that all others in the area are wearing impact-resistant eye and face
►
protection
EN
© Atlas Copco Industrial Technique AB - 9836 988900 00
Safety and operating instructions
5