Rs 485 Tx-: Synchronization; Shd: Fe Functional Earth, Shield; Io 1: Input/Output (Configurable); Factory Settings: Teach Input - Leuze electronic CML 720i Manual De Instrucciones

EN
CML 700i with PROFINET interface
6
A Receiver (R)
B Transmitter (T)
C Y-connection cable and synchronization cable (M12 socket/plug, 8-pin/5-
pin)
D BUS IN connection cable to open cable end or BUS IN connection cable to
RJ-45
E PROFINET BUS OUT connection cable (BUS IN/BUS OUT)
X1/X3 pin assignment
PIN (X1) X1 - Logic and power on the receiver and connection to
transmitter
1 VIN: +24 V DC supply voltage
2

IO 1: input/output (configurable)

3 GND: ground (0 V)
4 C/Q: IO-Link communication
5 IO 2: input/output (configurable)
6

RS 485 Tx-: synchronization

7 RS 485 Tx+: synchronization
8

SHD: FE functional earth, shield

X1 pin assignment - PWR IN/digital IO
PIN X1 - Short end of the Y-interconnection cable
1 VIN: +24 V DC supply voltage
2 IO 1: input/output (configurable)
Factory setting: teach input
3 GND: ground (0 V)
4 C/Q: IO-Link communication
5 IO 2: input/output (configurable)
Factory setting: trigger input
32
PIN (X3)
2
3
5
4
1