Weighing Mode; Counting Mode - OHAUS Scout SPX Serie Manual De Instrucciones

EN-6

3.4 Weighing Mode

This mode is the factory default setting.
1. If needed, press and hold Mode until [
2. If required, place an empty container on the pan and press Tare.
3. Add sample to the pan or container. The display shows the weight of the sample.

3.5 Counting Mode

This mode counts large numbers of items based on the weight of a reference count.
1. Place an empty container on the pan and press Tare.
2. Press and hold Mode until [
Weight, APW) will then display.
If no APW exists, the balance will display [
3. Press No to use the stored APW. Proceed to step 7.
4. Press Yes to establish an APW.
5. The balance will then display the stored sample size, i.e. [
toggle the choices (5, 10, 20, 50 or 100).
6. Put the indicated number of pieces on the pan then press Yes to calculate the APW. The
display shows the piece count.
7. Add additional pieces until the desired count is reached.
8. To clear the stored APW press and hold Mode until [
[
Note: Press Function to view the current APW.
3.6 Percent Mode
This mode measures the weight of a sample as a percentage of a reference weight.
1. If required place an empty container on the pan and press Tare.
2. Press and hold Mode until [
display. If no reference weight exists, the balance will display [
3. Press No to use the stored reference weight and proceed to step 6.
4. Press Yes to establish a new reference. Balance will now display [
5. Add the desired reference material to the pan or container. Press Yes to store the
reference weight. The display shows 100%.
6. Replace the reference material with the sample material. The display shows the
percentage of the sample compared to reference weight.
7. To clear the stored reference press and hold Mode until [
when [
Note: Press Function to view the current reference weight.
Find Quality Products Online at:
] is displayed.
] is displayed.
GlobalTestSupply
www.
SCOUT
] (Weigh) is displayed.
] (Count) is displayed. [
], proceed to step 5.
] is displayed. [
TM
SERIES BALANCES - SPX
] (Clear Average Piece
]. Press No or Back to
] is displayed. Press Yes when
] (clear reference) will then
], proceed to step 5.
].
] is displayed. Press Yes
.com
sales@GlobalTestSupply.com