CAPITAL SPORTS Aeris Manual Del Usuario página 37

EN
1
Attach the Front & Rear Stabilizer (No.1 & 12) to the Main Frame (No.81) using 4
Screws (No.9), 4 Spring washers (No.10) and 4 Washer (No.11). Tighten with an Allen
Wrench (No.A).
Attach Left Pedal (No. 40L) to Left Crank (No. 39L). Turn the Left Pedal (No. 40L)
counter-clockwise with the hand until it is tight, then use Spanner (No.B) to securely
tighten. Attach Right Pedal (No.40R) to Right Crank (No.39R). Turn the Right Pedal
(No.40R) clockwise with the hand until it is tight, then use Spanner (No.B) to securely
tighten.
Note: The Pedals (No.27L/R) are marked "L" and "R" for Left and Right. Make sure you
attach the correct pedal to the corresponding crank.
37