Specifications And Technical Data; Air Supply And Connections - Max NF255FA/18 Manual De Operaciones

3. SPECIFICATIONS AND TECHNI-
CAL DATA
1. NAME OF PARTS
7
2
1
6
5
4
10
2. TOOL SPECIFICATIONS
PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
RECOMMENDED
OPERATING PRESSURE
LOADING CAPACITY
AIR CONSUMPTION
 The machine has been compactly designed in order to im-
prove operating weight balance.
3. BRAD NAIL SPECIFICATIONS
.075" 1.9 mm
.051" 1.3 mm
5/8"
7/8"
15 mm
20 mm
.041" 1.05 mm
 The design of this tool is based on millimetric brad nails.
TOOL AIR FITTINGS:
This tool uses a 1/4" N.P.T. male plug. The inside diameter
should be 7mm (.28") or larger. The fitting must be capable of dis-
charging tool air pressure when disconnected from the air supply.
1 Frame
2 Cylinder Cap
3 Exhaust Port
4 Magazine
3
5 Slider Unit
6 Trigger
7 Grip
8 Click Lever
8
9 Warning Label
(back side)
0 Outlet
9
NF255FA/18
255mm (10")
64mm (2-1/2")
244mm(9-5/8")
1.2kg (2.7lbs)
5 to 7bar
(70 to 100 p.s.i.)
100Nails
3
0.68l(0.024ft ) at 7 bar
operating pressure
NF255FA/18
1"
1-3/16"
25 mm 1-3/8"
1-5/8"
30 mm
1-3/4"
35 mm
2"
40 mm
45 mm 2-3/16"
50 mm
55 mm
Wire gauge: 18
Wire gauge: 18
RECOMMENDED OPERATING PRESSURE:
5 to 7 bar (70 to 100 p.s.i.). Select the operating air pressure with-
in this range for best fastener performance.
DO NOT EXCEED 8.3 bar (120 p.s.i.).
4. TECHNICAL DATA
NOISE
A-weighted single-event sound power level
A-weighted single-event emission sound pressure level at
work station
These values are determined and documented in accord-
ance with EN12549 : 1999.
5. VIBRATION
Vibration characteristic value
These values are determined and documented in accord-
ance with ISO 8662-11.
This value is a tool-related characteristic value and does not
represent the influence to the hand-arm-system when using
the tool. An influence to the hand-arm-system when using
the tool will, for example, depend on the gripping force, the
contact pressure force, the working direction, the adjust-
ment of mains supply, the workpiece, the workpiece
support.
6. APPLICATIONS
 Door and window casings
 Plywood, decorative boards, and other interior finish works
 Panel assembly and moldings
 Sub flooring
 Furniture assembly including drawer assembly, case back
nailing, blind pinning, and other finishing works
 Cabinet assembly

4. AIR SUPPLY AND CONNECTIONS

WARNING
[AIR SUPPLY & CONNECTIONS]
Air compressor
Air hose
5
70
7
Used at 5 to 7 bar (70 to 100 p.s.i.)
7
------ LWA, 1s, d 85.5 dB
Uncertainty (KWA): 3 dB
------ LpA, 1s, d 81.8 dB
Uncertainty (KWA): 3 dB
= 2.31m/s
Uncertainty (K): 1.5m/s
Regulator
Air filter Oiler
100
3-piece airset
2
2