Specifications And Technical Data; Tool Specifications; Fastener Specifications - Max CN238D Manual De Instrucciones

OPERATING INSTRUCTIONS MANUAL

1. SPECIFICATIONS AND TECHNICAL DATA

1. NAME OF PARTS (SEE Fig.1,2)
1 Frame
2 Cylinder Cap
3 Contact Arm
4 Nose
2.

TOOL SPECIFICATIONS

PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
LOADING CAPACITY
RECOMMENDED
OPERATING PRESSURE
AIR CONSUMPTION
3.

FASTENER SPECIFICATIONS

PRODUCT CN238D
NO.
Collation 15 degree plastic
type collated coil nails
NAIL 17 to 38mm
LENGTH (11/16" to 1-1/2")
SHANK 1.47 to 2.0mm
DIAMETER (.057" to .079")
HEAD 3.1 to 5.0mm
DIAMETER (.122" to .197")
SHANK
TYPE
4. TECHNICAL DATA
NOISE
A-weighted single-event sound power level
------ LWA, 1s, d
A-weighted single-event emission sound
pressure level at work station------ LpA, 1s, d
Uncertainty
These values are determined and documented in accordance to EN12549:1999+A1:2008.
NOTE: These values are tool-related characteristic values and do not represent the noise generation at the point of use. Noise at the point
of use will for example depend on the working environment, the workpiece, the workpiece support, and the number of driving operations.
In addition, reference should be made to noise reduction measures.
NOTE: Workplace design can also serve to reduce noise levels, for example placing workpieces on sound-damping supports (see also ISO
11690-1).
5 Magazine
6 Trigger
7 Grip
8 Exhaust Cover (Exhaust Port)
CN238D CN450G
249mm (9-7/8") 299mm (11-3/4") 284mm (11-3/16") 270mm (10-5/8")
106mm (4-3/16") 133mm (5-1/4") 108mm (4-1/4") 125mm (4-7/8") 133mm (5-1/4") 129mm (5-1/16")
217mm (8-1/2") 260mm (10-3/8") 260mm (10-3/8") 270mm (10-3/4")
1.2kg (2.6lbs) 1.66kg (3.66lbs)
200 Nails 200 Nails
4 to 8 bar 4 to 7 bar
(60 to 120 p.s.i.) (60 to 100 p.s.i.)
0.5 L at 6 bar 0.88 L at 6 bar op-
operating pressure erating pressure
(0.080 ft3 at 90 p.s.i. (0.14 ft3 at 90 p.s.i.
operating pressure) operating pressure)
CN450G
15 degree plastic 15 degree wire / plastic
collated coil nails welded or collated coil nails
25 to 50mm 25 to 50mm
(1" to 2")
2.2 to 2.5mm 1.59 to 2.1mm
(.086" to .099") (.063" to .083")
5.3 to 7.15mm 3.5 to 5.0mm
(.208" to .281") (.138" to .197")
CN238D
88.7 dB
81.1 dB
ENGLISH
9 Trigger Lock Dial
0 Adjustment Dial
a Holder
CN452S
1.6kg (3.5lbs)
400 Nails
4 to 7 bar
(60 to 100 p.s.i.)
0.7 L at 6 bar
operating pressure operating pressure
(0.11 ft3 at 90 p.s.i.
operating pressure) operating pressure)
CN452S CN552S
15 degree wire / plastic
welded or collated coil nails
25 to 50mm
(1" to 2") (1" to 2")
1.59 to 2.5mm
(.063" to .098")
4.2 to 5.3mm
(.165" to .209")
Smooth, Ring, Screw
CN450G CN452S
94.7 dB 93.7 dB
89.0 dB 85.8 dB
1
CN552S CN650M
381mm (15")
330mm (13")
2.0kg (4.4lbs) 3.1kg (6.8lbs)
400 Nails 200 Nails
4 to 7 bar 5 to 7 bar
(60 to 100 p.s.i.) (70 to 100 p.s.i.)
1.0 L at 6 bar 1.7 L at 6 bar
operating pressure
(0.16 ft3 at 90 p.s.i. (0.27 ft3 at 90 p.s.i.
operating pressure)
CN650M
15 degree plastic
collated coil nails
27 to 50mm
(1-1/8" to 2")
2.2 to 2.8mm
(.086" to .110")
5.3 to 5.8mm
(.209" to .228")
CN552S CN650M
92.2 dB
84.9 dB
3 dB
CN890S
367mm (14-7/16")
331mm (13")
3.3kg (7.3lbs)
300 Nails
5 to 7 bar
(70 to 100 p.s.i.)
2.04 L at 6 bar
operating pressure
(0.33 ft3 at 90 p.s.i.
operating pressure)
CN890S
15 degree wire / plastic
welded or collated coil nails
45 to 90mm
(1-3/4" to 3-1/2")
2.5 to 3.8mm
(.099" to .148")
5.5 to 7.7mm
(.217" to .303")
CN890S
92.0 dB 90.1 dB
80.5 dB 84.9 dB