Carrying Out A Manual Breath Sample (Optional); Carrying Out A Passive Breath Sample (Optional); Removing The Mouthpiece; Menu Control - Dräger Alcotest 6000 Instrucciones De Uso

 To prepare a new measurement, press the
After the sensor's recovery time (see "Technical data" on Page 16) READY
is displayed and the device is ready to use again.
4.4

Carrying out a manual breath sample (optional)

If the test subject cannot provide the required minimum volume, the sampling
can be triggered manually.
Carrying out a manual breath sample:
1. Follow steps of the automatic breath sample.
2. If the progress bar is displayed after starting the breath sample, tap the
button.
In the results display, MANUAL is also displayed.
4.5

Carrying out a passive breath sample (optional)

During passive sampling, the sampling is manually initiated by the instrument
user. Possible applications include the testing of ambient air or the breath of
persons for the presence of alcohol.
Carrying out passive sampling:
1. Keep the
appears.
2. Hold the instrument, which is ready to measure, into the air to be analyzed
without a mouthpiece.
3. Tap the
In the results display, PASSIVE is also displayed. If no alcohol is detected, the
No Alcohol will be displayed and the LED will be green. In case alcohol is
detected, Alcohol will be displayed and the LED will be red.
4.6

Removing the mouthpiece

1. Push the mouthpiece up and out of the mouthpiece receptacle (see
illustration on Page 2).
2. Dispose of the mouthpiece in accordance with local regulations.
Do not reuse a mouthpiece.
4.7

Menu control

Accessing the menu:
Press the

button pressed for approx. 1 second until the startup screen
button to initiate the measurement.
button.
button.
en
Use
9