Preparation For Use; Switching The Instrument On And Off; Initial Start-Up - Dräger Alcotest 6000 Instrucciones De Uso

en
Use
4.1.3

Preparation for use

1. Ensure that the batteries are charged and inserted.
2. Ensure that a clean mouthpiece is attached.
3. Ensure that the device is held firmly and securely by using the wrist strap as
intended.
4.1.4

Switching the instrument on and off

Switching the instrument on:
1. Hold down the
2. Wait until the instrument displays that it is ready to measure.
Switching the device off:
1. Hold down the
be shown as well. If the display is off, stop pressing the button. Otherwise
the device will be switched on again.
The instrument will switch off automatically approx. 2 minutes after the last
use.
Switching off the instrument does not reduce the post-test waiting period
before you can perform another test.
4.2

Initial start-up

A setup wizard is opened when the instrument is switched on for the first time.
This step is not required for pre-configured instrument.
The following settings are made using the setup wizard:
 Language
 Date format
 Date
 Time format
 Time
 Measuring unit
All settings can be changed later on via the menu.
Language
A cursor pre-selects one language in the list. Press briefly on the button to
change the position of the cursor in order to select your needed language. If the
6
button for about 1 second.
button for about 3 seconds. A switch-off count down will