1. (For vehicles with 8 speed
transmission) Unclip and remove
the top of the shift knob assembly.
(Figure A)
2. (For vehicles with 8 speed
transmission) Remove (1) T-30 Torx
Screw from the shift knob then pull
up on the knob to remove.
(Figure A)
3. (For vehicles without 8 Speed
transmission) Push the collar down
at the base of the shift knob and
remove the pin then pull up on
shift knob to remove. (Figure B)
Dash Disassembly
(Figure A)
(Figure B)
99-6514B
4. Unclip and remove the shifter trim
panel. (Figure C)
5. Remove (2) Phillips screws securing
the pocket below the climate
controls then unclip and remove the
pocket. (Figure D)
6. Unclip and remove the factory
radio/climate control panel.
(Figure E)
7. Remove (4) Phillips screws securing
the radio chassis. (Figure F)
Continue to kit assembly
(Figure C)
2
(Figure D)
(Figure E)
(Figure F)