Kit Assembly - Metra 99-6514B Manual Del Usuario

ISO DIN head unit provisions
1. Attach the provided clips to the
radio trim panel. Metal clips at top
and plastic at the bottom.
(Figure A)
2. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips pan head screws supplied.
(Figure B)
3. Slide the aftermarket radio into
radio brackets and secure with the
screws supplied with the unit.
(Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Refer to the Interface Wiring
section of this manual.
5. Mount the new radio assembly into
the dash, snap-in the radio housing
panel, and reassemble dash in
reverse order of disassembly.

Kit Assembly

Clip
locations
(Figure A)
(Figure B)
(Figure C)
99-6514B
Double DIN head unit provisions:
1. Attach the provided clips to the
radio trim panel. Metal clips at top
and plastic at the bottom.
(Figure A)
2. Mount the DDIN radio to the radio
brackets using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Refer to the Interface Wiring
section of this manual.
4. Mount the new radio assembly
into the dash, snap-in the Radio
Housing Panel, and reassemble
dash in reverse order of
disassembly.
3
Clip
locations
(Figure A)
(Figure B)