Description Of The Kit; Safety Notices; Optional Module Description - WEG DeviceNet SSW-07 Guia De Instalacion

Ocultar thumbs Ver también para DeviceNet SSW-07:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. DESCRIPTION OF THE KIT

Contents:
SSW-07/SSW-08 DeviceNet Kit (Part number: 417114753)
Quantity
1

2. SAFETY NOTICES

ATTENTION!
Switch off the Soft-Starter SSW-07/SSW-08 before installing the
DeviceNet Kit.
The electronic boards have components that are susceptible to
electrostatic discharge. Never touch any of the electrical components
or connectors without following the proper grounding procedures. If it
is necessary to do so, touch the grounded heatsink or use a suitable
grounded wrist strap.

3. OPTIONAL MODULE DESCRIPTION

This optional module allows the Soft-Starter to communicate in a multipoint
DeviceNet network of up to 500m.
The DeviceNet kit is connected directly to the Soft-Starter. It is fitted into the
front cover slot for plug-in optional modules.
NOTE!
For more information refer to the SSW-07/SSW-08 Parameter Programming
and to the DeviceNet Communication manual, available on the CD that
comes with the Soft-Starter module or at WEG's web site (www.weg.net).
The DeviceNet kit has a connector for the remote keypad. The remote keypad is
not part of the DeviceNet kit and has to be ordered separately, if necessary.
Table 1 - Contents of the kit
Description
DeviceNet plug-in optional module
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Devicenet ssw-08

Tabla de contenido