Troubleshooting; Specifications - Sharp FP-A28U Manual De Operación

TROUBLESHOOTING

Before calling for service, please review the list below, since the problem may not be a unit malfunc-
SYMPTOM
Dust and smoke are not removed.
A clicking or ticking sound is heard
from the unit.
The discharged air has an odor.

SPECIFICATIONS

Power supply
Fan
Speed
Operation
Recommended Room Size
CADR(Dust / Smoke / Pollen)
Filter type
Cord Length
Dimensions
Weight
*1 Size of a room which is appropriate for operating the unit at maximum fan speed
Standby Power
Fan Speed Adjustment
Rated Power (W)
Fan Speed (CFM)
*1
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 0.3W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
REMEDY (not a malfunction)
• Clean or replace the HEPA filter if they appear to be
heavily soiled. (Refer to E-11, E-12 )
• Clicking or ticking sound may be audible when the unit
is generating ions.
• Check to see if the HEPA filter is heavily soiled.
• Plasmacluster Air Purifiers may produce a slight odor.
This is normal and is a result of the Plasmacluster Ions
refreshing the air.
MAX
45
99
385mm(W) x 128mm(D) x 380mm(H)
15 / in(W) x 5 in(D) x 14
1
8
E-13
120V 60Hz
MED LOW
26
64
120sq.ft(11.1m )
2
91 / 77 / 100
HEPA Filter
6.5ft (2.0m)
/ in(H)
7
8
8.2Ibs (3.7kg)
10
28