Installation - Aprimatic GA-MATIC PRO CF800 Instrucciones De Instalación Mecánica, Uso Y Mantenimiento

4

INSTALLATION

READ THE INSTRUCTION CAREFULLY
• Make sure the door structure is solid and suitable to be motor driven.
• Make sure when the door is moving there are no friction point.
• The door must be properly balanced and must be easily lowered and raised by hand.
2
4
Referring to Fig. 1 for recommended installation.
1) Guide
2) 24VDC flash light (optional)
3) Wall switch (optional)
4) Photo beam (optional)
Maintaining a minimum gap of 30mm from the top panel's maximum height (Fig. 2).
Make sure the guide is horizontal and vertical to the shaft. Make sure the connection of hanging bracket F and
ceiling is firm enough (Fig. 3).
30mm
Warning: Make sure the opener is affixed to noggins in ceiling and not to plasterboard. Failure to have a safe and
secure fixing will lead to opener falling, and cause serious persons and /or property damage.
18
FIG.2
1
3
4
FIG.1
5) Programming panel
6) Power socket
7) Door opener
6
5
7
FIG.3
DS41242-001