Maintenance; Final Notes; Important Information For The User; Packing List - Aprimatic GA-MATIC PRO CF800 Instrucciones De Instalación Mecánica, Uso Y Mantenimiento

9

MAINTENANCE

No particular maintenance is required for the logic circuit board:
- Check the door at least twice a year if it is properly balanced and all working parts are in good working condition
or not.
- Check the reversing sensitivity at least twice a year, and adjust if it is necessary. Make sure that the safety
devices are working effectively (photo beams, etc.)
Notice: a rude operating door can affect the life of the automatic opener due to incorrect loads and will void the
warranty.

10 FINAL NOTES

This manual is only used by technical persons who are qualified to carry out the installation.
No given information in this manual can be considered of any interest to the end user.
It is important for the installer to show their clients correct operation using of the opener including the using of
manual disengagement cord.
Inform the owner about the need of a regular and accurate maintenance, especially regarding a regular check of
the safety and reversing devices.

11 IMPORTANT INFORMATION FOR THE USER

Once the opener has been installed, the user must be informed about how it works and all the risks that can arise if
it is used improperly. The user must avoid placing himself/herself in dangerous situations such as standing within
the door's operating range when it is moving.
Do not let children play near the door, and keep the remote controls out of their reach.
All services, repairs or checks must be carried out by professionally qualified persons, and noted on a maintenance
register kept by the user.
IMPORTANT NOTE: In the case of a malfunction the user must call an authorized installer and should not attempt
to repair it by yourself.

12 PACKING LIST

Door
head operator
3 meters rail belt equiped:
Head operator fixing brackets:
Rail bracket:
Door bracket:
Handle:
Screw and bolt package:
Brackets for suspend application:
Door arm connection:
Remote control:
Instruction manual:
26
: 1
1
2
1
1
1
1
2
2
2 (for GA-MATIC PRO CF800 and GA-MATIC PRO CF1000 only)
1
DS41242-001