User Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - Sicam COLIBRI BL512 26 ITAS Manual Original

en 22 | COLIBRI BL512 26" ITAS | User information
2.

User information

2.1

Important notes

Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and
company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Sicam Tire Equipment". These instructions must be care-
fully studied prior to start-up, connection and operation
of the COLIBRI BL512 26" ITAS and must always be
heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Sicam Tire Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the COLIBRI BL512 26" ITAS and must al-
ways be heeded.
2.3

Electromagnetic compatibility (EMC)

The COLIBRI BL512 26" ITAS is a class A product as per
EN 61 326.
|
105 890 2010-11-08
3.

Product description

3.1

Expected use

COLIBRI BL512 26" ITAS is a modern tire changer for
mounting and demounting of car and motorbike tires.
i
COLIBRI BL512 26" ITAS has to be used exclusively
for the specified purpose and only in the functioning
scope shown in these instructions. Any other use
different from that specified has to be considered
improper and therefore not allowed.
i
The manufacturer is not liable for any damage
caused by improper use.
3.2

Requirements

COLIBRI BL512 26" ITAS has to be installed on an even
surface made of concrete or similar materials, and has
to be firmly anchored. A pneumatic connection is re-
quested.
3.3 Delivery specification
Denomination
COLIBRI BL512 26" ITAS
Bead lifting lever
Brush
Inflation manometer
Protection tab
Lane protection set for 19" wedge
Mounting tool cover
Bulb container
Bulb container support
3.4

Special accessories

Denomination
8" connections device (4 pieces)
Special 17-26" connections device (4 pie-
ces)
Motorbike wheel connection device
Bead breaker protection
Bead locking clamp
Lower wedge
Upper wedge
Order code
1 695 102 683
1 695 100 123
1 695 103 996
1 695 101 608
1 695 101 402
1 695 102 725
1 695 103 968
1 695 104 083
Order code
1 695 103 542
1 695 103 752
1 695 103 543
1 695 102 090
1 695 103 302
1 695 103 261
1 695 103 216
Sicam srl società unipersonale