Maxi-Cosi Citi Modo De Empleo/Garantia página 12

maxi - Citi 1 - HAE245 -bw
• Pull the belt tight (fig. H-5). Ensure the belt is not twisted.
GB
• Double check that the seat belt is threaded correctly through and over the three points marked bright blue. The
Maxi-Cosi Citi is now correctly installed.
Note:
If your seat belt appears to be too short for the installation method described above, an alternative method can be
used.
• First place the seat belt over the bright blue marking on the cover and through the lap belt hooks at the front and
the shoulder belt through the shoulder belt hook at the rear. Then fasten the seat belt into the buckle.
• Pull the seat belt tight.
• Ensure the belt is not twisted.
• Double check that the seat belt is threaded correctly through and over the three bright blue markings.
The Maxi-Cosi Citi has now been properly installed.
Adjusting the carrying handle
The carrying handle has 3 positions (fig. I).
Press the two buttons on either side of the carrying handle simultaneously and move the carrying handle forwards
or backwards as required. The buttons will pop up automatically when the carrying handle is in the correct
position.
1 Carrying position/car position
2 Sleeping position/rocking position
3 Sitting position
Using the control button (16) to attach seat on the Maxi-Taxi (fig. J).
Please refer to Maxi-Taxi users manual.
Maintenance
Cleaning of the shell
The shell may be cleaned with warm water and a gentle soap.
Washing the cover
12
10-01-2005 15:22
English
Pagina 12