Hayward AQUA RITE pro Guia Del Usuario página 34

Tabla de contenido

Idiomas disponibles

If AQL-CHEM is used

Chemistry Config.

Wizard + to enter

Sensing System

Enabled

Requires use of the optional AQL-CHEM Sensing Kit. Following the steps of

the Chemistry Config. Wizard will set up the AQL-CHEM to sense ORP and

pH levels. The AquaRite Pro will generate the correct amount of chlorine to

properly sanitize the pool based on the AQL-CHEM sensing function. Refer

to the AQL-CHEM manual for more detailed information.

If ORP Auto Sensing is not used

Chlorinator

50%

The desired output % is used to control the amount of chlorine the AquaRite

Pro generates. Raise this setting to increase chlorine level and lower it to

decrease chlorine level. If an AQL-CHEM is being used and ORP Auto

Sensing is enabled (see AQL-CHEM manual), the AquaRite Pro will override

the desired chlorinator output % setting and generate chlorine based on the

pool's ORP level.

If ORP Auto Sensing is not used

Super Chlorinate

22 hours

Use the Super Chlorinate feature when there is an unusually high bather load,

a large amount of rain, a cloudy water condition, or any other condition that

requires a large amount of chlorine to be introduced to the pool. Note that the

filter pump must be running for the entire time during the Super Chlorinate

period. Set the actual time based on the size of the pool; larger pools require

more hours, smaller pools require less.

If AQL-CHEM is used

pH Calibration

Wizard + to enter

Use this Wizard to calibrate the optional AQL-CHEM's pH probe. This

requires a manual pH test of the pool water using a dependable red phenol

test kit (see AQL-CHEM manual).

If AQL-CHEM is used

Clean Probe Wizard

+ to enter

Use this Wizard to clean the optional AQL-CHEM's ORP and pH probes. The

probes must be clean and free from oil, chemical deposits and contamination to

function properly. Slow response, increased need to calibrate, and inconsistent

readings are indications that the probes need to be cleaned (see AQL-CHEM

manual).

10 / 20

Push to access Chemistry Config. Wizard