Functional Description; Intended Use; Product Features; Noise/Vibration Information - Bosch PBH 2000 RE Manual Original

Ocultar thumbs Ver también para PBH 2000 RE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
18 | English
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone, as well as for light
chiselling work. It is also suitable for drilling
without impact in wood, metal, ceramic and
plastic. Machines with electronic control and
right/left rotation are also suitable for screw-
driving.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Lock-on button for On/Off switch
5 On/Off switch
6 Rotational direction switch
7 Mode selector switch
8 Button for depth stop adjustment
9 Wing bolt for adjustment of auxiliary handle
1 619 929 764 | (10.8.09)
10 Auxiliary handle
11 Depth stop
12 Key type drill chuck*
13 Extraction sleeve of the dust extraction
attachment*
14 Clamping screw for the dust extraction
attachment*
15 Depth stop of the dust extraction attach-
ment*
16 Telescopic pipe of the dust extraction
attachment*
17 Wing bolt of the dust extraction attachment*
18 Guide pipe of the dust extraction attach-
ment*
19 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 88 dB(A);
Sound power level 99 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Hammer drilling into concrete: Vibration emis-
sion value a
=16 m/s
h
Chiselling: Vibration emission value a
Uncertainty K=1.5 m/s
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
2
, Uncertainty K=1.5 m/s
=14 m/s
h
2
.
Bosch Power Tools
2
,
2
,

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pbh 2000 sre

Tabla de contenido